Tooth Extraction Surgery - Complications During Tooth Extraction • OHI-S

Soft tissue injuries

Damage to soft tissue is a common occurrence in the practice of a dental surgeon. For example, careless or incomplete detachment of the gum when inserting the cheeks of the forceps under the gum and further advancement will lead to stretching of the tissue with subsequent rupture. When forceps are applied to the edges of the alveolus and the gum is captured, crushing and even tearing off the marginal part of the gum occurs. Insufficient detachment of the circular ligament leads to rupture of the gums during removal of the tooth from the socket. Damage to the tongue, tissues of the floor of the mouth, cheeks, and palate occurs when the elevator slips during tooth dislocation.

Prevention of soft tissue damage

Prevention of damage to soft tissues is quite simple and consists, firstly, in careful exfoliation of periodontal tissues and careful handling of instruments in the oral cavity, secondly, in peeling off the gums to a sufficient depth, and thirdly, in using instruments for their intended purpose. When inserting the elevator blade and during tooth dislocation, it is necessary to block the direction of possible sliding of the tool with the finger of your free hand.

Treatment of soft tissue damage

If the soft tissue damage is not accompanied by bleeding, the tooth extraction should be completed, and then the edges of the wound should be brought together with sutures. If there is bleeding, it is necessary to stop it by ligating the vessel in the wound, bringing the edges of the wound together with sutures. In case of a blind wound, sutures are placed on the bottom of the mouth and tongue, after which the wound must be drained for 12-24 hours by inserting a rubber or polyethylene strip into it. When the gum edge is torn off exposing the alveolar process, it is necessary to cover the exposed bone surface. To do this, two vertical incisions are made in the gums to the arch of the vestibule of the mouth, and the mucoperiosteal flap is peeled off. In order to mobilize it, the periosteum is crossed. After this, the mucoperiosteal flap is lowered and fixed with sutures so that it covers the exposed area of the alveolar process. The second option is to form a mucoperiosteal flap in the area of the vault of the oral vestibule and move it to the area of the gum defect.

Equipment

The sequence of actions carried out in the patient’s field of view should be as follows:

the assistant puts on a mask,
then hands the mask to the doctor,
the doctor puts on a mask,
the assistant puts on his gloves,
the doctor alternately offers his hands to the assistant so that he can help put on gloves,
The assistant helps the doctor put on gloves.

Note. The equipment of the assistant and the doctor in the field of view of the patient should be carried out in the following cases: the patient has not been to the dentist for a long time and, presumably, has no idea about modern methods of ensuring the safety of treatment or has forgotten about them; suspicious person - carefully observes the actions of the medical staff; demanding patient - interested in the progress of treatment, asks questions about its safety, etc.

Equipment should be carried out out of sight of the patient if it is unpleasant for him, which can be guessed by his behavior; if he has been treated by you several times and knows that you are taking measures to ensure the safety of treatment, in particular, you have already demonstrated the equipment.

So, the assistant equips the doctor after putting on the gloves for himself.

How to help a therapist put on gloves. The assistant should take the glove to be put on by the cuff with his fingertips and turn it out, covering his fingers with the cuff, while both thumbs should be moved to the side. The glove being put on should be turned towards the doctor with the palm side. After the doctor puts on the glove, the assistant straightens the cuff on his hand.

How to help a surgeon put on gloves. The assistant hands the doctor gloves, having first put on his own. To avoid infection of the sterile surface of the doctor’s gloves, the assistant takes the glove by the cuff, while placing the tips of the index and middle fingers of both hands inside the glove, stretching the cuff, and pressing the ring and little fingers to the palms of his hands so as not to touch the doctor’s sterile gloves.

When putting on gloves, you should present them with the palm side towards the doctor, guided by the thumb. After the doctor puts on the glove, he raises his hand up, and the assistant, removing his fingers from the glove, straightens the cuff.

Typical shortcomings and errors in the “Equipment” aspect

Assistant:

equips himself and equips the doctor behind the patient’s back (when this is not required);
prepares gloves for the doctor of the wrong size;
delays in preparing for treatment, forcing the doctor to equip himself;
incorrectly (inconveniently) hands the glove to the doctor, so it is not possible to put the glove on completely.

Doctor:

without waiting for an assistant, puts on gloves independently;
equipped behind the patient's back (when it is not required).

Note. Some participants in the “doctor-assistant” dyad each outfit themselves independently, not only during a therapeutic or orthopedic appointment, but also during a surgical one, which is incorrect and is an anti-marker for the patient’s safety of treatment. The psychological significance of the equipment is lost: the patient is deprived of the opportunity to see the refinement of this process and the respectful attitude of the assistant to the doctor.

Tooth crown fracture

A tooth crown fracture is often a complication. It occurs due to the destruction of the crown by a pathological process or due to anatomical features. Increases the risk of traumatic removal of the root remaining in the hole. A fracture of the tooth crown can occur due to incorrectly selected instrumentation and violation of the extraction technique.

Prevention of tooth crown fracture

Prevention of tooth crown fractures lies in the correct tooth extraction technique and strict adherence to the principle of anatomical correspondence of the forceps to the tooth being removed. When fixing the forceps, you should not use excessive force, and tooth dislocation should be carried out with smooth back-and-forth movements with a gradual increase in the amplitude of tooth movement and the applied force. Before removing a tooth affected by caries, a fibrotomy should be performed along the entire perimeter of the root part of the tooth to the maximum possible depth in order to reduce the force required to dislocate the tooth.

take, intercept, hold

The assistant takes or intercepts the instrument from the doctor’s hands.

The doctor takes or intercepts the instrument from the assistant’s hands.

Typical shortcomings and mistakes in the “Take, intercept, hold” aspect

Assistant:

does not know how to replace instruments from one to another, does not know how to hand instruments to the doctor;
does not know or does not foresee what instrument the doctor will need at the next moment (for example, during restoration of a tooth with a composite material);
does not come to the doctor’s aid during treatment when it is necessary to hold the patient’s cheek or tongue, matrix, or suture material;
is in a hurry or abrupt in movements with instruments - there is a danger of injury to the patient or doctor;
does not comment on his actions for the doctor and patient if necessary.

Doctor:

relies only on himself, because he does not count on the effective help of an assistant or does not trust him;
does not verbalize the request for the assistant, unreasonably relying on his intelligence.

Tooth root fracture

A tooth root fracture can occur due to: • an error when choosing a tool for tooth extraction; • violation of the rules for the rational use of tools; • features of the anatomical structure of the tooth (long, thin curved roots, root divergence).

Prevention of tooth root fracture

Prevention of root fracture comes down to following the recommendations described above. The first dislocation movement should be made towards the thinner and less durable alveolar wall. Subsequent stages of tooth dislocation should be carried out with smooth back-and-forth movements with a gradual increase in the applied force, mainly in the direction in which the tooth being moved encounters less resistance. It is advisable to plan a tooth extraction operation taking into account X-ray data. If, based on the analysis of radiographs, it is determined that the tooth being removed has diverging curved roots, then to prevent a root fracture, it is better to start the operation by crossing the interroot adhesions with a fissure bur, and then sequentially remove each part of the tooth using an elevator or forceps.

Treatment of tooth root fracture

If a root fracture occurs, you should proceed to an atypical tooth extraction operation: • detachment of the mucoperiosteal flap; • access to the root through a burr hole in the area of the vestibular wall of the alveolar process (alveolar part of the lower jaw); • dislocation of the root with an elevator and pushing through the alveolus; • filling the alveoli with an osteotropic drug; • fixation of the mucoperiosteal flap and bringing together the edges of the gums above the alveolus of the extracted tooth with sutures.

Replace

The assistant changes depending on the stage of reception:

boron in a mechanical, turbine tip;
tips on the physiodispenser in accordance with the required speed limit;
roller balls in the patient’s mouth;
the instrument used for the next stage of treatment;
broken, dirty, sterilized instrument in a cassette.

Note. Opening a package with a sterile instrument should make as little noise as possible, especially if the doctor is talking to the patient at this time. The doctor, while the assistant is replacing something, has the opportunity to:

offer the patient a break to rest;
maintain contact with the patient;
inquire about his well-being;
inform the patient about the upcoming procedure or stage of treatment;
relax.

Typical shortcomings and errors in the “Replace” aspect

Assistant:

cannot replace burs in the handpiece, equipment (for example, a device for removing hard plaque (piezon) with a device that removes pigmented plaque - air flow, used instruments in a cassette (tray) due to ignorance or misunderstanding of the essence of the manipulation being performed;
does not comment on his actions for the doctor and the patient in the event of a pause when replacing something;
with noise, in response to the doctor’s phrase addressed to the patient, he opens the package with a sterile instrument;
does not invite the patient to rest, relax, using a pause in work when something is replaced.

Doctor:

replaces burs, instruments, roller balls in the patient’s mouth (in simple cases), without relying on the effective assistance of an assistant or not trusting him;
does not verbalize the request for the assistant, unreasonably relying on his intelligence;
does not fill the pause with communication with the patient when something is replaced.

Fracture, dislocation of an adjacent tooth

Fracture or dislocation of an adjacent tooth during an extraction operation most often occurs when using forceps with wide cheeks or when removing teeth with an elevator, when the adjacent tooth serves as a support for the instrument. This complication is considered a medical error.

Prevention of fracture or dislocation of an adjacent tooth

Prevention of dislocation of an adjacent tooth is the careful removal of the causative tooth without relying on the adjacent tooth, or when a tooth is dislocated with an elevator, the fulcrum for the instrument should be the edge of the interdental septum, the neck of the tooth, and not the crown. When using a direct elevator, the first stage of tooth dislocation should be carried out mainly by reciprocating rotational movements of the instrument as its blade is inserted between the surface of the tooth and the wall of the alveolus.

Treatment of a dislocated adjacent tooth

If the adjacent tooth is completely dislocated, if it is intact, replantation is possible. If a single-rooted tooth is dislocated, it should be immobilized using a dental wire splint. It is not necessary to immobilize a multi-rooted tooth after replantation. The patient should adhere to a gentle diet and carefully observe the rules of oral hygiene. If tooth extraction was performed due to an acute or chronic infectious-inflammatory process, a course of antibacterial therapy should be administered. The patient should be under dispensary observation with monitoring of the condition of the dental pulp (electroodontometry in dynamics) and the condition of the periodontium (x-ray monitoring after 2, 6 and 12 months). If a fracture of an adjacent tooth occurs, we choose treatment tactics based on the clinical situation: we determine the condition of the hard tissues of the tooth, pulp and periodontium. Assessing the condition of the dental tissues can also help determine whether there were any factors that caused the fracture: periodontal disease, caries, poor-quality fillings.

Disinfection of gloves

The assistant disinfects:

your gloves and the doctor’s gloves before starting the treatment;
the doctor's gloves every time during the appointment, after he touched the lamp, chair, medical card, picture and other objects.

The procedure for disinfecting gloves in the patient’s field of view:

the doctor presents his gloved hands folded in the shape of a boat,
the assistant treats the doctor’s gloves with a disinfectant spray,
the assistant processes his gloves.

Typical shortcomings and errors in the aspect of “Disinfection of gloves”

Assistant:

disinfects gloves out of sight of the patient;
disinfects gloves by spraying the spray on the patient’s face;
delays in processing gloves, forcing the doctor to disinfect his gloves himself.

Doctor:

without waiting for an assistant, he disinfects his gloves himself;
presents an outstretched arm with a vertically raised palm for processing;
based on the patient, does not ask the assistant to disinfect gloves after touching anything;
touching something, disinfects gloves out of sight of the patient or without voicing this action to the patient.

Pushing the tooth into the perimaxillary soft tissues

Pushing a tooth into the perimaxillary soft tissue occurs when removing roots or impacted teeth using an elevator. Most often when removing third molars in case of resorption of the alveoli from the vestibular side. A dislocated tooth or part of it is displaced under the mucous membrane. Diagnostics An empty socket and the disappearance of part of the tooth are grounds to assume the possibility of pushing it into the perimaxillary soft tissue. To prevent “forgetting” part of a tooth, you should not throw away the extracted tooth, but carefully examine it and make sure that you have completely removed it. If the tooth was intentionally fragmented, you need to assemble the entire “puzzle”. If part of the tooth is still missing, you need to palpate the soft tissue in the area of removal. If a compaction is clearly palpated through the mucosa, it is necessary to dissect the mucous membrane above it, stratify the tissue and expose the surface of the fragment. Then it is removed using a curettage spoon or tweezers. If the “disappeared” tooth fragment is not determined by palpation, it is necessary to conduct an X-ray examination - take extraoral radiographs of the expected localization zone of the tooth fragment in two mutually perpendicular planes - frontal and sagittal. If it is impossible to continue the operation on an outpatient basis, the patient should be sent to a hospital.

X-ray of the cervical spine. The wisdom tooth to be removed is pushed into the soft tissues of the upper neck: a) side view; b) front view.

One of the roots of the extracted tooth is pushed under the mucous membrane of the alveolar process from the buccal side.

Perforation of the floor of the maxillary sinus

Perforation of the floor of the maxillary sinus can occur when removing upper molars, less commonly premolars. Contributing factors: • anatomical features of the structure of the upper jaw - low position of the sinus bottom and features of the relative position of the roots of the teeth with the sinus; • infectious and inflammatory processes (periodontitis, osteomyelitis), cysts, tumors. They lead to resorption of the bone plate between the sinus and the apexes of the roots of the teeth, up to its complete absence; • rough removal of teeth and curettage of pathological tissues from the apical periodontium.

Clinic for perforation of the maxillary sinus floor

The clinical picture of perforation of the maxillary sinus floor is quite specific. A characteristic symptom is the appearance of bloody discharge from the nose on the side of the perforation. The patient complains of air passing through the tooth socket and a feeling of pressure.

Diagnosis of perforation of the maxillary sinus floor

Diagnosis of perforation of the floor of the maxillary sinus is quite simple. When the bottom of the maxillary sinus is perforated, a connection between the oral cavity and the nasal cavity occurs. Therefore, when the pressure in the nasal cavity and sinus increases during vigorous exhalation, air can penetrate into the alveolus of the extracted tooth, causing foaming of the blood present there. If you invite the patient to pinch the external nose and exhale vigorously through the nose, the appearance of bloody foam in the alveolus of the extracted tooth will appear even more clearly. In this case, you can hear the whistling sound of a stream of air passing into the mouth through the alveoli (nasal test). If you ask the patient to increase the pressure in the oral cavity (inflate the cheeks), you can hear the whistling sound of a stream of air passing from the oral cavity into the maxillary sinus through the alveolus of the extracted tooth, and from the sinus into the nasal cavity through a natural opening - hiatus maxillaris (oronasal test). A characteristic symptom is the appearance of bloody discharge from the nose on the side of the perforation.

Prevention of perforation of the maxillary sinus floor

Prevention of perforation of the floor of the maxillary sinus comes down primarily to identifying the presence of risk factors in the patient before removing the upper molars based on X-ray data and medical history. Removal of pathological tissue in the area of the apex of the upper molars should be carried out carefully, and if there are risk factors, the procedure should be abandoned altogether.

Treatment of perforation of the maxillary sinus floor

Treatment of perforation of the bottom of the maxillary sinus consists of creating conditions for the formation and preservation of a blood clot in the alveolus of the extracted tooth. After replacing the blood clot with granulation, osteoid, and then mature bone tissue, there will be a reliable separation of the maxillary sinus from the oral cavity. This is achieved in the following ways. 1. Bringing the gum edges together with sutures. Thus, the entrance to the hole from the oral cavity is blocked. 2. Laying of the mucoperiosteal flap in the area of the vault of the vestibule of the mouth, bringing it down until it comes into contact with the palatal edge of the gums

Before suturing, the walls of the alveoli are carefully scraped out with a sharp curette, which causes bleeding and promotes the formation of a blood clot, opening the way for the release of osteoblast precursors involved in reparative osteogenesis. Any osteotropic biological product can be injected into the alveolus.

Pushing the root into the maxillary sinus

Pushing the root into the maxillary sinus occurs when the forceps or direct elevator are incorrectly advanced, when the root of the tooth being removed is separated from the bottom of the sinus by a thin bone plate or it is thinned or completely absent as a result of a pathological process. The cheek of the instrument must be inserted between the root and the wall of the socket, and if the forceps are applied incorrectly, the cheek presses on the root of the tooth and thereby moves it into the maxillary sinus. In some cases, when the handles of the forceps are brought together and the cheeks are not applied deeply enough, the root slips out and gets into the sinus. To diagnose this complication, radiographs of the paranasal cavities and intraoral photographs are taken. X-ray examination helps to clarify the location of the tooth. Endoscopy is also used to detect a root or tooth in the sinus. A rhinofibroscope or endoscope is inserted into the defect in the bottom of the maxillary sinus through the socket of the extracted tooth and examined.

When the root is pushed into the maxillary sinus, perforation of the sinus bottom occurs, so this complication is accompanied by a clinic characteristic of perforation. 1. When you exhale sharply through the nose, you can observe the appearance of blood and small bubbles from the hole. 2. The appearance of blood in the nose on the side of the damaged sinus. 3. The appearance of a nasal voice. 4. The patient’s complaints about the passage of air through the socket, a feeling of pressure in the projection of the sinus. A root that has entered the maxillary sinus must be done as quickly as possible, otherwise the mucous membrane of the maxillary sinus may become infected and sinusitis may develop. The tooth or part of it cannot be removed through the socket, because this only worsens the conditions for subsequent closure of the sinus defect. The root is extracted in a hospital. A burr hole is made in the anterior outer wall of the maxillary sinus. In case of developed sinusitis, all stages of radical surgery of the maxillary sinus are performed. At the same time, plastic closure of the sinus floor defect is performed. Using an endoscope inserted through the formed hole in the lower nasal meatus, the location of the root is recorded and it is removed with special endoscopic instruments.

Adjusting modes

The assistant regulates:

operating modes of devices (for example, piezon, apex locator, physiodispenser);
office lighting when selecting the color of a future tooth restoration or orthopedic structure;
modes of water and solution supply to the dental unit located in its access zone.

Typical shortcomings and errors in the aspect “Adjusting modes”

Assistant:

cannot change certain modes (operation of devices, light brightness, speed of supply of water, solutions in the installation or equipment), because he does not know where the regulator is located or does not know how to operate it;
does not change regimens in a timely manner because he does not understand the essence of the manipulation performed by the doctor;
does not comment on his actions for the doctor and patient if necessary;
does not invite the patient to rest or relax when there is a pause when changing certain modes.

Doctor:

he himself regulates the operating modes of devices, equipment, dental units located in the assistant’s access zone, without relying on the assistant’s help or not trusting him;
does not verbalize the request for the assistant, unreasonably relying on his intelligence;
does not fill the pause with communication with the patient when you have to wait while something is adjusted.