Cost of bite correction using an example

What does the price of installing a bracket system in St. Petersburg consist of and how to calculate it cost of bite treatment?

These questions are relevant for all patients. And, unfortunately, it is impossible to give a definite answer. The fact is that the final amount will depend on at least three factors, namely:

• Types of materials used
• Type of attachment of the arch to the bracket
• The presence or absence of a desire to visually hide the presence of a brace system on the teeth.

Correction of the bite occurs in several main stages:

• Stage 1. Preparatory: consultation with an orthodontist, taking impressions, drawing up a treatment plan.
• Stage 2. Installation of the bracket system.
• Stage 3. Treatment, as well as care and hygiene: the longest stage, usually lasts 2 years.
• Stage 4. Removing the brace system: removing the system, fixing the retainer or making a retention mouth guard.

Below, using these indicators on types of brace systems, we invite you to consider several different options for brace systems and their differences. And also calculate the cost of the entire period of bite treatment using a specific example.

The result of orthodontic treatment

The goal of treatment with braces is to form the correct closure of teeth in the sagittal, vertical and transversal planes. In 1972, physician Lawrence Andrews formulated six keys to optimal occlusion in the permanent dentition. When correcting incorrect position of teeth and correcting the relationship between the upper and lower jaw, orthodontists of the 21st century are guided by the signs identified by the researcher:

• fissure-tubercle contact of the molars of the upper and lower jaws;
• crown angulation;
• crown inclination;
• lack of tooth rotation;
• tight approximal contacts;
• parallelism of the occlusal plane of the upper and lower jaw to the true horizontal.

The orthodontist forms the correct occlusion, improves the torque of the teeth and the exposure of the incisors. As a result of treatment, the doctor expands the dentition and creates an ideal smile.

What is an ideal smile? When a person smiles, the anterior teeth, premolars, and mesial surfaces of the first molars are visible. The cutting edges of the incisors and canines of the upper jaw follow the contours of the lower lip and form the arch of the smile.

result of bite correction

What are braces?

Braces, or rather brace systems, are dental structures for eliminating malocclusions and problems with incorrect position of teeth.
Alignment with orthodontic braces began to be practiced back in 1776 in France, but the heavy structures used then interfered with speech and extended beyond the mouth. More than a hundred years later, the device was radically improved in America. Today, the classic system looks different and consists of three main elements: ➢
braces - clasps that are attached to the teeth
➢
orthodontic arch
➢
fastenings (ligatures) for coupling the arch with the clasps

History of the creation of braces

Doctors of the ancient world of the 9th - 6th centuries BC straightened teeth using improvised devices. In 1728, surgeon Pierre Fauchard published a study, one chapter of which was devoted to orthodontics. In the 9th century, the American Edward Engle created the first prototype of the braces system. The scientist invented four devices:

• E-arc gold alloy;
• modification of the E-arch with pins and tubes;
• ribbon arc;
• edgewise braces.

The operating principle of the structures underlies the operation of 21st century braces.
The E-arch, which expands the dentition, was made of a gold alloy and fixed into rings installed on the molars. Each tooth was tied to an arch with wire. Subsequently, Engle refined the design: adjustable tubes appeared on each tooth and pins on the arch. The pins fixed the arch into the slots, the doctor adjusted the pins, and the teeth moved. The system was not actively used in clinical practice, and the E-arm remained an intermediate option.

Later, an American scientist created a ribbon arch. Engle replaced the tube design on each tooth with a vertical rectangular groove. The crowns of the teeth tilted under the influence of the arc, but the roots remained in place. The limitation in the width of the groove and the low elasticity of the arc did not allow the torque to be controlled.

In 1928, Edward Engle designed the edgewise braces system. The scientist compared the geometry of the groove and the arc and replaced the ribbon arc with a rectangular wire. Engle established the slot size of 0.022 x 0.028 inches, which is what 21st century orthodontists use.

Edgewise braces were not wide enough to rotate the tooth under the force of the archwire. To achieve the result, orthodontists installed two braces on the tooth at once. The design formed the basis of ligature systems. With the development of orthodontics at the beginning of the 20th century, the gold alloy from which the arch was made was replaced by stainless steel. The increased rigidity of the steel compensated for the reduced arc thickness. A groove size of 0.018 x 0.025 inches has appeared, which, along with 0.022 x 0.28, is used in practice by orthodontists.

Damon Clear with arc

How do braces straighten teeth?

It is designed by nature that our teeth can change position - independently or under the influence of external forces. Thanks to this property, orthodontic treatment with braces becomes possible. Its principle is the following.

1. Based on the patient’s clinical picture, the doctor plans a trajectory of movement for each tooth; one bracket is responsible for one dental unit.
2. During the process of fixing the braces, the clasps are connected to each other by an arch with shape memory, which it tends to take over time.
3. Under the influence of the arc, the dentition begins to take the desired position.
4. During treatment, the archwire is replaced with a more rigid one to increase the impact.

How do braces work?

The system consists of brackets fixed to the teeth, into the groove of which an orthodontic arch is inserted, and additional elements. On the sixth and seventh teeth, the doctor installs buccal tubes to secure the ends of the arch. The force on the tooth depends on the rigidity of the arch and the position of the arch in the bracket groove, the use of additional metal and elastic elements:

• metal ligatures;
• chains;
• springs;
• bite pads made of composite material or bite braces;
• buttons;
• hooks;
• additional arcs;
• elastics.

Damon Q2 with hook

Metal ligatures press the archwire tightly against the bracket, and springs and elastic chains create the force to move individual teeth. Using additional elements of the system, the doctor controls the impact on each tooth.

The arc straightens and pulls the bracket, the force is transmitted to the tooth and causes a process of aseptic inflammation in the surrounding tissues. Osteoclast cells destroy bone at the junction of the root and the alveolar wall. On the other side of the tooth, osteoblast cells synthesize new bone tissue. The balance of osteoblast and osteoclast activity ensures natural tooth movement. Braces direct and accelerate the physiological effect of the force of the arc and additional elements.

arc in groove Damon Q2

The operating principles of self-ligating and ligature systems differ. Self-ligating passive braces provide physiologically adequate force to move teeth due to low friction of the archwire in the closed space of the groove. In self-ligating braces with an active type of ligation, the clip and the arch press against each other. In classic ligature braces, the arch is held tightly in the groove by elastic or metal ligatures.

Fixing the system

Before installing braces, the orthodontist conducts a diagnosis and agrees on a treatment plan. The doctor refers the patient to professional oral hygiene. The procedure is necessary to keep the enamel under the braces intact.

The doctor treats the area of ​​fixation with orthophosphoric acid and applies a primer. The primer contains fluorine compounds that penetrate the enamel. Fluorine molecules are embedded in the crystal lattice of hydroxyapatite enamel and reduce permeability to carious bacteria. Before fixation, the doctor applies light-curing materials, for example Blugloo, Grengloo, Enlight, to the base of the bracket.

Fixation methods

The doctor fixes the braces directly or indirectly. Regardless of the method, installation is painless for the patient.

In the case of the direct method, the orthodontist positions each bracket according to anatomical landmarks, the projection of the root in the bone tissue and the inclination of the tooth manually. Next, the material is illuminated with a polymerization lamp. The patient spends 30 to 50 minutes in the chair.

With the indirect fixation method, the manipulation takes 10–15 minutes and does not cause discomfort to the patient. The procedure consists of several stages:

1. The orthodontist manually positions each bracket on plaster models of the jaws;
2. transfers braces to a silicone tray;
3. applies adhesive to braces;
4. During the visit, he moves the elements of the system from the tray onto the prepared enamel and illuminates it with a polymerization lamp.

Fixation of the structure is a key stage of treatment, regardless of the method used. The orthodontist adjusts the width of the teeth and creates an aesthetic smile arch through the correct positioning of each element of the system. Braces work out torque, rotation and angulation. The doctor installs the arc into the slots and releases the patient until the next activation.

Removing braces

After completion of treatment, the long-awaited moment comes - removal of braces. Using special atraumatic forceps, the orthodontist peels off the bracket from each tooth with one movement of his hand. The patient hears a click and the bracket painlessly moves away from the enamel surface.

Next, the doctor grinds off the remaining glue and polishes the enamel to return the tooth to its original appearance. Grengloo bracket bonding material reduces the excessive impact of rotating instruments during polishing: removing adhesive from the tooth surface does not cause additional damage to the enamel. When there is no green material left, the enamel surface is cleaned.

Doctors from the Department of Orthodontics at the Tabriz University of Medical Sciences in Iran conducted a study and compared the differences in enamel damage after removing two brace designs - with a mesh-type base and with posts.

Researchers have scientifically substantiated the influence of the design of the bracket base on the adhesion strength to the enamel. According to the results of a study by orthodontists, at the base with columns the degree of adhesion to the enamel is higher. At the same time, braces with a mesh base cause less damage to the enamel when removed.

Doctors of the 21st century prefer systems with a mesh base to reduce the number of enamel microcracks during debonding. An example is the Damon Q and Damon Q2 self-ligating braces and the Mini Diamond ligature systems. Ormco's patented bracket base treatment makes removal safe for the enamel.

Damon Q2 with mesh base

How to fix crooked teeth without braces?

Today, dentistry offers several alternative solutions that allow you to straighten teeth without braces:

• Restoration: correction of defects in the dental crown using composite materials. Provides quick results at an affordable price, but will last about five years, and the color of the material will change over time.
• Veneering: fixation of plates on teeth that are almost indistinguishable from natural enamel. The method is used instead of braces for small curvatures or large gaps and is not suitable if the patient has complex dental curvature or malocclusion.
• Installation of removable braces. Essentially, these are orthodontic structures that do not need to be worn constantly. However, calling them braces is not entirely correct; these are completely different systems.

Types of braces

The structures are classified according to the material of manufacture, location in the oral cavity and type of arch fixation. Here are examples of each type of braces.

Material of manufacture

1. Metal braces . Self-ligating Damon Q and Damon Q2 are made from 17-4 stainless steel alloy. In addition to orthodontic products, the high-strength alloy is used in the aviation and chemical industries. An example of metal ligature braces is Mini Diamond and Orthos.

Damon Q2 with lid open

Mini Diamond model

2. Devices made of bioinert titanium alloy . This material is chosen if the patient is allergic to nickel or chromium. An example is the classic Titanium Orthos braces.

3. Ceramic systems . Damon Clear/Clear2 translucent braces are made from durable polycrystalline aluminum oxide (PCA). The period of adaptation to foreign structures in the oral cavity increases, since Damon Clear is larger than metal Damon Q.

translucent Damon Clear

4. Braces made from artificially grown sapphire . Inspire Ice transparent ligature devices have durable wings that do not break off under stress.

transparent ligature Inspire Ice

Location in the oral cavity

The orthodontist fixes the braces vestibularly or lingually. For vestibular localization, the elements are glued to the visible part of the teeth. An example is Damon self-ligating braces. Lingual systems are installed on the dentition from the tongue side, the design is invisible to others. The adaptation period to internal braces is longer than to vestibular systems: it is not easy for the tongue to get used to a foreign structure in the oral cavity. An example is STb braces. Due to the fact that the bases of the braces are made individually according to exact impressions of the jaw, the cost of lingual systems is higher.

vestibular ligature braces Mini Diamond on typodont

Arc fixation type

The arch is attached to classic edgewise braces with elastic and metal ligatures. Ligature braces correct the position of individual teeth and correct complex dental anomalies. The ligatures press the arc tightly against the groove, increasing friction in the system. Example – Mini Diamond and Orthos.

ligature Orthos made of metal

Self-ligating brackets hold the archwire without ligatures: the cover of the structure closes and closes the groove space. In devices with a passive type of ligation, the groove does not interfere with the movement of the arc, the cover is motionless, the arc slides without obstacles, and friction in the system is minimal. The Damon Q and Damon Q2 systems work out the parameters embedded in the braces and start the physiological process of moving teeth.

closed Daimon Q

In active self-ligating structures, the clip puts pressure on the archwire and has a mechanical effect on the entire system. Teeth move in an adequate force zone under the influence of load vectors.

Metal braces: reviews

Metal braces are the most common and most reliable type of braces. Typically, they are made of stainless steel, gold-plated steel or titanium (the latter used for allergies to nickel, which is part of the steel). Metal braces typically have the smallest sizes of all types of braces, but keep in mind that sizes vary slightly between manufacturers.

Metal braces are slightly less expensive when compared to sapphire and ceramic braces, but they are significantly less expensive than lingual braces. Metal ligature braces are especially accessible - their price will be on average 1.5 times lower than non-ligature braces. However, there are exceptions here, for example, for non-ligature braces “Forestadent Quick” (Germany) - the price for 2 jaws starts from 125,000 rubles, which is quite consistent with the cost of ligature braces.

Ligature and self-ligating braces (made of metal) –

The only disadvantage of metal braces is that they are clearly visible on the teeth. But you can personalize them and make them colorful by using colorful rubber ligatures. And for the most fashionable ones, it is possible to install braces in the shape of hearts, flowers, soccer balls or stars. See Table 2 for all the advantages and disadvantages of metal braces.

Which braces are more profitable to install?

Self-ligating and ligature braces correct the bite and correct complex dental anomalies. Non-ligating systems are more expensive, but the installation of self-ligating structures reduces the number of visits to the clinic. At a lower price for edgewise braces, the patient visits the orthodontist an average of 24 times during treatment, 2.5 – 3 years. When installing self-ligating systems, approximately 12 visits to the doctor are required. The course lasts from 1 to 2.5 years.

Clinic management is often not ready to purchase expensive systems and pay for additional training for orthodontists. Doctor A.V. Tikhonov economically substantiated the advantages of installing ligature-free braces. The orthodontist compared the rate of arch replacement during activation of self-ligating structures and traditional models with ligatures. On average, removing and installing the arch takes 8 minutes. 14 sec. on classic systems and 1 min. 21 sec. – on self-ligating ones. Usually the arches are changed on the upper and lower jaws - the duration of the manipulation is doubled.

treatment on Damon Q2

According to the researcher, taking into account the reduction in treatment time and the number of visits to the doctor, ligature-free braces are more economical for the clinic and the patient. The ergonomics of working with the ecosystem of Damon braces and additional elements reduces the appointment time and the total financial costs of the person visiting the clinic.

Phases of orthodontic treatment

Orthodontic treatment consists of four stages:

1. leveling;
2. basic mechanics stage;
3. detailing and completion;
4. retention.

Leveling

After fixing the braces, the leveling stage begins: the doctor installs round arches. The sequence of arch replacement is standard; if necessary, the orthodontist adjusts or supplements the protocol.

Protocol for replacing wires during treatment with Damon:

1. 0.014″ CuNiTi – 10 – 12 weeks;
2. 0.016″ CuNiTi – 6 – 8 weeks (intermediate arc if necessary)
3. 0.014x0.025″ CuNiTi – 10 – 12 weeks;
4. 0.018x0.025″ CuNiTi – 4 – 6 weeks;
5. 0.019x0.025″ TMA or SS.

arc in groove Damon Q

0.013″ wires are typically used for severely crowded teeth. The higher the degree of crowding, the more difficult it is to install the arch into each groove. For moderate to mild crowding, the doctor begins treatment with an arc with a cross-section of 0.014″.

Round arches of low rigidity are made from a thermoactive nickel-titanium alloy with the addition of copper. The temperature of the oral cavity activates the physical properties of the metal, and the arc straightens to its original state. The doctor changes the arches in accordance with the treatment protocol. Thanks to the initial arches of low rigidity, the alignment of the dentition occurs, the rotation and position of individual teeth are corrected.

Correctly selected braces torque at the beginning of treatment reduces the number of visits at the final stage.

Basic Mechanics

After the leveling stage, the doctor installs rectangular arches. CuNiTi arches with a cross section of 0.014″, 0.016″ and 0.014x0.025″ are used to completely correct tooth rotations, begin to practice angulation and torque, and create the shape of the dentition. Steel, TMA and nitinol rectangular archwires are used to stabilize the dentition, close spaces, control torque, angulation and rotation.

girl with Damon Clear

During the basic mechanics phase, the doctor sometimes needs to re-bond the braces. This is a standard manipulation that does not cause any difficulties for the orthodontist. The position of the teeth and the vector of force application change, the doctor re-fixes the braces so that the teeth move in the right direction. At this stage, a complex change in the bite occurs; the doctor prescribes elastics. The doctor bends the arches, closes the interdental spaces, makes occlusal linings made of composite material, secures the hooks and installs microscrews.

Final stage

At the final stage, the doctor carries out the details: corrects the position of individual teeth, bends the arches and re-prescribes the scheme for wearing elastics. At the final stage, the doctor uses rectangular TMA 0.019x0.025″ archwires to create detailed bends and then softly transition to 0.019x0.025″ steel archwires, if necessary. A large selection of Damon torque options due to the implementation of the braces prescription allows the doctor to reduce the number of bends on the arches. The orthodontist corrects torque: the vestibulo-oral inclination of the tooth in the sagittal plane. Steel arches with a cross section of 0.019x0.025″ fill the groove, and the bracket fulfills the parameters laid down in the groove.

Retention period

To consolidate the results of orthodontic treatment, the doctor installs a retainer - a metal wire on the palatal and lingual surfaces of the anterior group of teeth. At the age of 25, the formation of the bones of the facial skeleton ends. Up to this age, patients wear a retainer twice as long as treatment with braces. After 25 years, a wire retainer is installed on both jaws for life. Regardless of age, doctors recommend wearing a transparent retention mouthguard at night. If the patient does not follow the doctor's recommendations during the retention period, the teeth may return to their original position.

How to choose a brace system

The primary task for the patient is to find a doctor with whom a trusting relationship will be established. The orthodontist will conduct a diagnosis, discuss a treatment plan and offer several braces to choose from. The doctor recommends braces based on the patient’s financial capabilities, the complexity of the clinical case and the anatomical features of the dentition. The decision-making is influenced by the doctor’s personal preferences - some specialists work only on self-ligating braces using the straight arch technique, others prefer a multi-loop arch and ligature structures.

young man with Ormco translucent self-ligating braces

Ceramic and sapphire systems are chosen to partially camouflage orthodontic treatment. Bite correction with clear braces takes longer than with metal Damon Q braces due to the higher friction of the archwire and ceramic groove bottom.

treatment with Inspire Ice

Braces: price in Moscow

For the simplest metal braces, the price in Moscow starts from 100,000 rubles for 2 jaws (in economy class and mid-price clinics). Usually the cost of braces only includes their installation and removal, i.e. the price usually does not take into account the costs of periodic correction sessions of the braces system, as well as the cost of a retainer or aligners, which will be required after the braces are removed.

A braces correction session in different clinics can cost from 1,600 to 3,000 rubles, and the lower the cost of braces, the more often correction sessions usually have to be done (for example, once a month - instead of once every 2 months). And this is not due to the orthodontist’s desire to earn more, but from the technical features of cheaper options for braces. The cost of the retainer will be approximately another 16,000 rubles. And diagnostics, which is necessary to draw up a treatment plan, will cost approximately 5,000 rubles.

The most popular models of metal braces are:

• "In-Ovation R" (Dentsply, USA),
• "Damon Q" (Ormco, USA),
• "Empower" (American Orthodontics, USA),
• "Victory" (3M Unitek, USA),
• "Forestadent" (Germany),
• "Marquis" (Ortho Technology, USA).

How much do the leading braces cost, “Damon-Q”, “Empower” and “Victory” - they will cost you from 150,000 to 165,000 rubles (all prices are for 2 jaws). In the line of Forestadent braces there are more budget models “Forestadent Sprint” and “Forestadent Quick”, the price of which will be about 120,000 rubles, and for “Forestadent Sprint mini” – from 145,000 rubles.

There is also a large range of more budget bracket systems (including those made in Russia). But if we take well-known manufacturers whose products are of high quality, then the optimal economical option may be, for example, Marquis braces (USA). The price for them will average about 100,000 rubles.

Cost of braces made of ceramics and artificial sapphire –

As we said above: traditional metal braces on teeth are more affordable - compared to braces made of ceramics, artificial sapphire, or just very expensive lingual braces. For example, the price for ceramic braces or transparent braces made of artificial sapphire will average from 120,000 to 160,000 rubles for ligature braces, and from 140,000 to 220,000 rubles for non-ligature braces (also for 2 jaws).

But the absolute record holder is the so-called “Incognito” lingual braces, which are also called invisible braces - their average price is 450,000 rubles (for 2 jaws). This article is mainly devoted to metal braces, but you can read similar reviews about other options for braces systems using the links below.

→ Rating and cost of ceramic braces → Rating of sapphire braces → Rating and cost of lingual braces

Photos of teeth before and after braces

Trust in a doctor consists of many factors: reviews and recommendations from friends, a well-conducted consultation, doctor’s certificates, diplomas and awards, photos of clinical cases “before” and “after” of treatment with braces published on the Internet. Doctors actively maintain groups on social networks and blogs on clinic websites, post videos on YouTube, and post photographs with the results of orthodontic treatment.

deep bite

high crowding, flat profile

moderate crowding, asymmetry

high degree of crowding, open bite, posterior crossbite

case without removal

bilateral crossbite with a high degree of crowding of the anterior group of teeth in the upper jaw

Alternative to treatment with braces

An alternative to braces is aligners. Transparent hard aligners are used to move teeth in cases where the patient has increased aesthetic requirements. The aligners are made in the laboratory on a 3D printer based on an impression of the jaws. Patients change aligners in the order specified by the doctor. The disadvantage of aligners is the high cost of treatment, but the advantage is the aesthetic component: the aligners are invisible to others. Treatment with aligners takes longer and is suitable for clinical cases of mild to moderate complexity.

The doctor attaches attachments made of composite material to the teeth, on which the mouth guard presses. The teeth move slowly; halfway through the treatment, the orthodontist takes an impression of the jaw and sends it to the laboratory to make new aligners.

At what age are braces placed?

The mobility of teeth in the jawbone persists throughout a person’s life, therefore, the answer to the question “Can braces be placed on crooked teeth in adulthood?” - positive. However, correcting a child’s bite with braces is much easier.

You can begin treatment as early as 9 years of age, even if not all baby teeth have been replaced by permanent teeth. The most optimal age for installing braces is 12 - 13 years old, but even at 30, braces will show good results. It will just take more time.

Partial bracket system

For children in the period of changing temporary teeth to permanent ones, a “2 by 4” system is installed. Braces are fixed on four incisors and two molars. The design is used to close large interdental spaces when there is insufficient space for permanent teeth, early removal of temporary teeth to save space. Often, a 2-by-4 system prepares a child for primary orthodontic treatment with a full brace system. Braces are fixed at 6–7 years of age, when the first permanent molars erupt.

There is no age limit for orthodontic treatment. At any age, braces are firmly fixed to the enamel, and teeth move. Implants or ankylosed teeth in the mouth serve as support and do not move or participate in orthodontic treatment.

Indications and contraindications for installation

Problems that alignment with braces can help solve:

• crooked teeth due to improper growth
• displacement of the dentition as a result of the removal of dental units
• jaw development disorder

When there is crowding and gaps between teeth, braces are the optimal solution. In the latter case, it will not be possible to manage with orthodontic treatment alone; complex procedures with the participation of a surgeon will be required.

Duration of treatment

How long do you wear braces? Treatment with ligature structures averages 2.5 – 3 years. Self-ligating devices are usually worn for 1 – 2.5 years. The duration of treatment depends on the model of braces, the experience of the doctor, the complexity of the clinical case and cooperation with the patient. If you do not wear elastics and do not follow the orthodontist's recommendations, treatment will slow down.

girl with Mini Diamond metal braces

The patient comes to the appointment with the regularity specified by the doctor. At the initial stage of treatment with a self-ligating brace system, the intervals between visits are 8 – 10 weeks. During the basic mechanics phase, the patient visits the orthodontist every month. When installing ligature structures, he comes for activation at least once a month at each stage of treatment.

teenagers with Ormco braces

TO SUM UP:

Summing up all the necessary stages, the minimum cost of correcting a bite using a simple metal brace system will be = 500 + 3,000 + 30,000 + 30,000 + (36,000 * 2 jaws) + 18,000 = 153,500 rubles.

Those. for two years of treatment you will spend the amount of 153,500 rubles.

If we divide this amount by 24 months (average treatment time), we find that the average financial burden for one month over two years will be 6,396 rubles.

To summarize, we can say that yes, the cost of braces varies greatly. However, no matter what brace system you choose, the result will exceed all your expectations, the treatment time in the positive environment of the ArtDental clinic will fly by quickly, and you will have a beautiful and happy smile!

How to brush teeth with braces

Regardless of the type of braces and the number of visits to the clinic, a person needs to carefully monitor their oral hygiene. Orthodontic patients follow a diet. Doctors recommend eliminating sticky foods: toffee, halva, nougat, chips, chewing gum, consuming with caution and cutting hard vegetables and fruits into pieces. It is not recommended to drink coffee, red wine and other drinks with dyes. Orthodontists advise avoiding cold or very hot foods: sudden temperature changes damage metal and sensitive ceramics in the oral cavity.

With braces, brushing your teeth becomes more difficult. Using circular movements of an orthodontic toothbrush, the patient removes food debris and plaque from the vestibular surface of the teeth and the space around the bracket. The internal and chewing surfaces are cleaned with a manual toothbrush. The space around the braces and in hard-to-reach places is cleaned with a monotuft brush and dental brushes. Doctors advise using superfloss and irrigator.

It is necessary to brush your teeth three times a day after meals and perform professional oral hygiene in the clinic every 2 to 4 months. By following the doctor's recommendations and maintaining oral hygiene, the patient speeds up treatment.

Braces do not damage the enamel; caries occurs as a result of poor hygiene. The intensity of plaque depends on the type and size of the structure, but the main factor is the patient’s willingness to brush their teeth thoroughly and regularly. Caring for the oral cavity with small self-ligating appliances is easier than with ligature structures. Food remains under elastic and metal ligatures, which leads to the formation of caries.

Getting used to braces

The patient gets used to the braces system in the mouth within a couple of weeks. When the physiological movement of teeth begins, people experience discomfort due to aseptic inflammation of the bone. Patients with self-ligating braces stop feeling pain after a couple of days; when installing ligature structures, the discomfort goes away on the sixth day. The level of discomfort is influenced by the pain threshold, which is individual for each person.

Sometimes, at the initial stage of treatment, nitinol round wires cause discomfort. A glass of cold water relieves discomfort. Due to the physical properties of the thermal activity of the metal, the tension decreases and the discomfort goes away.

The metal of nitinol arcs is in one of two phases. When the temperature changes, the crystal lattice of the alloy changes from the martensite state to the austenite state and back. The doctor inserts a thermoactive arc into the grooves of the braces; under the influence of the temperature of the oral cavity, the arc straightens and gently pulls the teeth along with it. If the discomfort persists for a long time, the doctor prescribes painkillers to the patient.

Braces for extracted teeth

It is possible to install an orthodontic structure in the absence of one or more teeth, but it depends on the specific clinical picture. For example, it is quite possible to straighten a slight curvature in the frontal zone, even if there are no molars in the row. But is it possible to use braces to close a void when supporting teeth are missing? In this case, installing a system makes sense only if we are talking about 6, 7 and 8 teeth. If the figure eight (wisdom tooth) is missing, movement is impossible, since the chewing teeth will not be enough for full functioning.

Treatment with braces during pregnancy

Pregnancy is not a contraindication for treatment. During pregnancy, women take vitamins that support bone health. Metabolic processes in a woman’s body accelerate, and teeth move faster. Before installing braces, the orthodontist sends the patient for sanitation and professional oral hygiene. To strengthen the enamel, remineralizing therapy is carried out.

Pregnant women, unlike other patients, do not take painkillers to overcome discomfort during tooth movement at the leveling stage. During pregnancy, women often suffer from gingivitis and bleeding gums. Diseases complicate hygiene and are relative contraindications to orthodontic treatment. Sometimes, in order to avoid possible risks, bite correction is postponed until after the birth of the child.

How safe are braces for teeth?

Generally, wearing braces is a safe procedure. However, wearing them complicates oral hygiene, which can lead to the accumulation of plaque and hard tartar. If plaque and tartar are not removed in time, this will lead to the development of caries and gum inflammation.

Secondly, the process of moving teeth leads to the fact that the roots of the teeth become a little shorter (the tops of the roots are partially “dissolved”, which is associated with the movement of the teeth). Loss of root length can result in less stable teeth, especially in people who have short physiological root lengths to begin with.

Thirdly, you shouldn’t get braces if problems with your bite and teeth position are minimal (especially if you don’t like brushing your teeth). Often, after removing braces, “discoloration of tooth enamel” may be observed on the front surface of the teeth, i.e. the enamel will be spotty. This is especially true for people with weakly mineralized tooth enamel (with low resistance of tooth enamel to caries), and for people with insufficient oral hygiene. And it may turn out that you will have straight teeth, but with an aesthetically unsatisfactory appearance of the tooth enamel.

Removing teeth before installing braces

Sometimes, according to the orthodontist, it is necessary to remove teeth to make room for dentition correction and improve the facial profile. The orthodontist makes the decision about removal after diagnosis and discussion of the treatment plan with the patient. Photometric analysis of the face, examination of X-ray images and diagnostic results help the doctor make the right conclusion.

The complexity of the clinical case affects the need for removal. The choice of prescription in Damon braces in some cases allows you not to remove teeth. To achieve correct occlusion without tooth extraction, the doctor corrects the bite, installs microscrews and performs separation.

How much do braces cost with installation?

Orthodontic clinics use different pricing policies. Pricing is based on the composition of the service and the frequency of payments. In some orthodontic centers, the cost of treatment includes the price of braces, while in others they pay for the system separately.

treatment on the Orthos design

There is an option for a one-time payment for the course of treatment and a scenario in which the patient pays monthly for system activation. For the patient, from the point of view of economic justification, full payment is more profitable, since the final price is not affected by fluctuations in the ruble exchange rate and changes in the price list in the clinic.

The cost of activation of ligature and self-ligating braces is approximately the same. Payment for treatment using classical systems with ligatures consists of 24 visits to the doctor and the relatively low price of the structure. Self-ligating devices are more expensive, but require the patient to go to the clinic only 12 times. Convenience of design, reduction of treatment time, the number of visits to the doctor and the time that the patient spends in the orthodontist’s chair give self-ligating devices qualitative advantages.

The cost of the course is determined by the orthodontist after diagnosis and drawing up a treatment plan.

Head of the St. Petersburg clinic “Full Order”, candidate of medical sciences Tikhonova A.V. compared the effectiveness of treatment under the scheme with a one-time payment “All inclusive” and with payment by visits.

We provide an approximate comparison of ergonomics and financial efficiency of treatment for various price options. Prices are set hypothetically, taking into account the estimated average market prices for St. Petersburg at the time of publication of the manual.

information from the book “Myths about the Damon system” by orthodontist A.V. Tikhonov

The results of the study indicate that the all-inclusive one-time payment scheme is preferable for the doctor and the patient. Payment for results allows a competent orthodontist to quickly complete treatment and increase the profitability of the practice, and the patient to receive a beautiful and healthy smile earlier.

perfect smile with Inspire Ice

How much does it cost to install braces (for 2 jaws) –

1) Consultation with an orthodontist is usually free. 2) Diagnostics (taking and making impressions, analysis of control diagnostic models, calculation of TRG, analysis of orthopantomograms, which are necessary to draw up a treatment plan) - from 5,000 rubles.

3) Metal ligature braces −

• “Marquis” – price from 100,000 rubles,
• “Forestadent Sprint” – from 120,000 rubles,
• “Forestadent Mini-Sprint” – from 145,000 rubles,
• “Victory” – from 160,000 rubles.

4) Metal self-ligating braces −

• “Forestadent Quick” - from 125,000 rubles,
• “Damon Q” − from 155,000 rubles,
• “In-Ovation R” - from 160,000 rubles,
• "Empower" - from 160,000 rubles.

5) Ceramic braces −

• ligature - price from 125,000 to 160,000 rubles.
• non-ligated (self-ligating) - price from 140,000 to 220,000 rubles.

6) Braces made of artificial sapphire −

• ligature braces “Pure” – price from 125,000 rubles.
• ligature “Inspire-ICE” – price from 160,000 rubles.
• non-ligature “Damon clear” – price from 180,000 rubles.

7) Lingual braces −

• In-Ovation-L braces – price from 230,000 rubles,
• WIN braces – from 280,000 to 300,000 rubles,
• Incognito brand braces - from 450,000 to 500,000 rubles.

Braces correction session (carried out once every 1-2 months) – from 1600 to 3000 rubles. Read more about prices for different braces options using the relevant links above.

How to get a tax deduction for treatment with braces

For three years, Russian tax residents can claim a tax deduction for treatment with braces. Taxpayers receive a refund from the state in the amount of 13% of the amount spent on their own treatment, treatment of minor children, parents or spouses. Only the personal income tax that the taxpayer paid to the state for the last year is returned.

Package of documents for the tax office:

1. declaration 3-NDFL;
2. certificate from place of work 2-NDFL;
3. documents from the clinic - a copy of the treatment agreement, a copy of the clinic’s license, a certificate of payment for treatment, cash receipts.

A person who has undergone orthodontic treatment and is claiming a refund must file a tax return by the end of April. The state returns 13% of the maximum 120,000 - 15,600 rubles.

What are the benefits of early treatment?

When correcting a bite, in most cases the patient will go through a stage where his upper incisors will (temporarily) stick out forward. Such protruding teeth, especially in children, are most susceptible to injury from falls and bruises, and besides, they are not very aesthetically pleasing. Early treatment, for example, avoids this situation.

Also, early correction of the bite allows the orthodontist to positively influence the growth of the jaw, the width of the dental arches, improve the aesthetics and self-esteem of the child, and eradicate bad habits. The process of eruption of permanent teeth is also improved by creating space for them to erupt (if there is a lack of it), the total time of orthodontic treatment and its cost are reduced, and diction is improved. We hope that our article on the topic: Installation of braces reviews was useful to you!

Sources:

1. “Orthodontics. Textbook for dentists" (Kutsevlyak V.I.), 2. American Association of Orthodontists (USA), 3. National Library of Medicine (USA), 4. "Conceptual orthodontics" (Williams Stefan), 5. "Fixed orthodontic technique" (Gerasimov S.N.), 6. https://www.realself.com/.